Spotting Units and Disinfection

Micro Spotty

Portable, small size cold spotting unit designed for the removal of tiny spots.
It can be placed on a table, or on its optional stand with built in shelf for spotting products.

  • Stainless steel surface
  • Powerful suction, operated by foot pedal
  • Cold spotting gun
  • Drying gun with flat nozzle
  • Reservoir for waste liquids


  • Stand with built-in shelf for spotting products
  • Second spotting gun with tank for chemical product

DescriptionMobile spotting unit
Electrical requirements230V 50Hz
220V 60Hz
Total power0.15 kW
Steam consumption
Dimensions720 x 290 x 330 mm
Net weight16 kg


Mini Spotty

Spotting table for cold and hot spotting.

This spotting table is available in different versions:

  • with boiler
  • with compressor
  • with suction wall


  • Stainless steel spotting surface
  • Stainless steel arm with suction
  • Powerful suction operated by foot pedal
  • Drying gun
  • Two spotting guns equipped with tanks for chemicals
  • Liquids separator
  • Garment tray
  • Compressor (Only on models: 4203, 4206, 4207.)
  • Suction wall (Only on models: 4205, 4207.)
  • 4kw steam generator with air/steam gun (Only on models : 4202, 4206.)


  • Steam/air gun (Only on models: 4201, 4203, 4205, 4207.)
  • 5 L boiler with steam/air gun (Only on models: 4201, 4203, 4205, 4207.)
  • Stand on casters with shelf (Only on models: 4201, 4203, 4205, 4207.)

DescriptionWithout compressorWith compressorWith boiler and without compressorWith boiler and with compressorWith suction wall and without compressorWith suction wall and with compressor
Electrical requirements230V 50Hz400V 3N 50Hz400V 3N 50Hz400V 3N 50Hz230V 50Hz400V 3N 50Hz
220V 60Hz220V 3 60Hz220V 3 60Hz220V 3 60Hz220V 60Hz220V 3 60Hz
Total power0,4 kW1,9 kW4,77 kW6,27 kW0,4 kW1,9 kW
Steam consumption1,12 (in the presence of a gun A/V)1,12 (in the presence of a gun A/V)1,12 (in the presence of a gun A/V)1,12 (in the presence of a gun A/V)
Dimensions1640 x 430 x 1800 mm1640 x 430 x 1800 mm1450 x 505 x 1800 mm1450 x 505 x 1800 mm1320 x 550 x 1860 mm1320 x 550 x 1860 mm
Net weight45 kg87 kg65 kg107 kg65 kg107 kg

Spotty Jet

Pre-spotting cabinet.

The economical and ecological solution to all problems concerning pre- treatment and spotting. Designed for professional dry-cleaners, groups together in the same machine both a spotting cabinet and a spotting table.


  • Entirely built out of stainless steel
  • Wide spotting surface
  • The large surface of 100 × 50 cm allows you to work comfortably and includes lighting and suction grilles.
  • Cold spotting gun
  • Soap gun


  • Pivoting spotting arm, with suction
  • Hot spotting module
  • The boiler is conveniently mounted on a tray that slides out of the machine body for refill and maintenance.
  • Steam/air gun with boiler or steam separator
  • Drying gun
  • Second chemical products gun with tank
  • Mechanical spray gun for soaps
  • Active carbon filter
  • 1,5 kw compressor

DescriptionPre-spotting cabinet
Electrical requirements230V 50Hz
220V 60Hz
Total power0,37 kW
Steam consumption1,12 kg/h (in the presence of a gun A/V)
Dimensions1120x820x1890 mm
Net weight101 kg


Ozone sanitizing cabin. available in version maxi and mini.

Ozone is a highly unstable natural gas with oxidizing and disinfectant properties.
As soon as ozone comes into contact with organic matter, an oxidation reaction is made. Basically, all living microorganisms are killed, such as mites, bacteria, viruses, moulds, while the odor molecules are oxidized and transformed into other harmless molecules, this process eliminating all forms of bad odor. Since ozone is a heavier gas than air, it can penetrate inside the fibres of fabrics (mattresses, sofas, armchairs, carpets, car interiors, and especially helmets and shoes...). In this way it reaches and eliminates any microorganism and foul-smelling substance present even in the most difficult to reach points, impossible to thoroughly sanitize with a classic wash, however meticulous and accurate.

How does it work

Inside the cabinet is recreated what happens in nature, the natural cycle of ozone in the atmosphere regulated by the Sun.

  • 1st STEP
    first lamp that emits radiation at 200 nm wavelength, allows to split the oxygen and transform it momentarily into Ozone.
  • 2nd STEP
    The ozone produced oxidizes all harmful substances inside the cabin. An internal industrial fan allows the correct air circulation and therefore the achievement of ozone in all hidden points.
  • 3rd STEP
    A second lamp emitting radiation with a wavelength of 254 nm helps the natural ozone to oxygen conversion reaction.
  • 4th STEP
    When the ozone level is depleted, the machine unlocks the door, and you can pick up the material put inside, which is completely sanitized.


  • Possibility to choose three work programs with pre-set timing.
  • Lamp breakdown warning.
  • Acoustic and visual warning of end cycle.
  • Total cycle counter of the machine.
  • Safety block for door’s opening.
  • Shelves adjustable in height.
  • Small display for the visualization of the machine’s status.
  • Amalgam lamps.
  • High efficiency.
  • Long lasting lamps.
  • Constant sanitizing action over the lamp life.
  • Electronic Ballast specifically designed for amalgam lamps.

DescriptionOzone sanitizing cabin – MaxiOzone sanitizing cabin – Mini
Electrical requirements230V 50Hz230V 50Hz
220V 60Hz220V 60Hz
Blowing motor power0,73 kW0,73 kW
UVC lamp power0,7 kW0,7 kW
Ozone lamp power (production 2,5 g/h)0,7 kW0,7 kW
Total power*1,43 kW1,43 kW
Dimensions800x1840x605 mm800x1250x605 mm
Net weight110 kg75 kg
* The lamps function one at a time, never together.